Don’t Take Chances !  Take positive action against contamination with the QMI Safe-Septum

You can be safe with Safe-Septum from QMI.  It keeps bacteria, yeast, mold and other unwanted organisms from contaminating your fermentation process during sampling or inoculating.

• Safe-Septum is aseptic, pressure and temperature stable, and pre-sterilized.   The multi-port design is easy to retrofit to your bioreactor.  In fact, most applications require no engineering, cutting or weldingmodifications to use Safe-Septum.
  
  

• Our written instructions can easily be incorporated into your Standard Operating Procedures (SOP) manual.
  
  
• Pre-sterilized
• FDA Approved
• Disposable
• Needle Channels That Can Easily Be Identified After Use
• Can Accommodate Needles As Large As 14g
• Validated

Contact Us For Installation Instruction

Click here to watch the QMI Safe-Septum

EASY TO USE

Inoculation/Injection Procedure:

1. At desired time of injection, remove dust cover.

2. Sanitize injection port outer surface with a proper strength sanitizing solution.

3. Aseptically place needle (or needles) onto sterile syringe or other transfer container.

4. Insert needle through QMI Port and into tank or other vessel to inject cultures, nutrients or other liquids as desired.

5. Withdraw needle (or needles) and dispose of properly.

6. Replace QMI Port after each channel has been used only once

Sampling Procedure:

The QMI Safe-Septum can also be used for aseptic sampling using the following procedure:

1. At desired sampling time, remove dust cover.

2. Sanitize Ports outer surface with proper strength sanitizing solution.

3. Aseptically place needle on sterile syringe.

4. Insert needle through one of the unused guide holes in the Port.

5. Fill syringe with sample.  Remove needle and dispose of properly.

6. Conduct laboratory analysis as necessary.

7. Replace the QMI Port after each channel has been used only once.